Get the app

The tracker is free. Every paid plan starts with a free trial.

Download TrainRec on the App StoreGet TrainRec on Google Play

A man driving a weighted sled across artificial turf.AI-generated image

Guides · Strength training · Updated 2026-11-01

How do you do a sled push, and how much weight should you put on the sled?

Grip the sled's poles and lean in at a low angle, then drive it forward with short, quick steps. Start with the empty sled or a light load you can keep moving the whole length, and add plates once your speed holds. The same plates can feel much heavier on one floor than another, so judge the load by how the sled moves, not by the number. No sled? A plate push, a towel push, hill sprints or a wall drive train the same forward drive.

  1. Load it light. Start with the empty sled, or one small plate. You can always add more after your first push.
  2. Grip the poles high. Hold the tall poles near the top. A high grip puts your body at about a 45 degree angle, which is the easier position to learn.
  3. Lean in and brace. Step back so your body leans into the sled in a straight line from head to heels. Tighten your belly and keep your back flat.
  4. Drive with your legs. Push the floor away with short, quick steps, driving each knee forward like you're starting a sprint. Stay on the balls of your feet.
  5. Keep it moving. Push all the way to your mark without stopping, since getting the sled going again takes more force. Walk back and rest before the next push.

What a sled push is

A sled push means driving a weighted sled across turf or a smooth floor with your legs. You hold the poles and lean in at a low angle, then run or march it forward. There’s no lowering half to each rep, so most people pick it up in one session.

It works your legs and hips hard, and it gets your heart rate up fast. Coaches use it two ways: short all-out pushes to build speed and strength, and longer pushes as conditioning. A sprint coach writing for the NSCA (the National Strength and Conditioning Association) suggests sled work 2 to 3 times a week during a six-week training block.

Grip and body angle

Most push sleds have tall poles. Where you hold them sets your body angle:

  • High grip, arms long. Hands near the top of the poles, body at about 45 degrees. This is the place to start, and long arms help you move fast.
  • Low or bent-arm grip. Hands lower and elbows bent, so your body is closer to flat. This lets you push more weight, but it takes more practice.

Either way, keep a straight line from your head to your heels and don’t let your back round. Drive your knees forward and stay on the balls of your feet, the way you would at the start of a sprint.

How much weight to use

There’s no single right number, for two reasons.

People differ a lot. A study of 90 male high school athletes found that the load that slowed them by a quarter spanned 23% to 42% of body weight across the group. The load that cut their speed in half spanned 45% to 85%. Two people of the same size can need very different weights.

Floors differ a lot. Most of what you push against is friction between the sled and the floor. In one study of sled towing, the grippiest of four sports surfaces had nearly three times the friction of the slickest. A study on artificial turf also found that it takes more force to get the sled started than to keep it moving. That’s why stopping halfway makes the push feel so much harder.

So start with the empty sled and add a plate at a time. Here’s a common starting plan from a fitness guide reviewed by a strength coach:

Goal Load Push Repeats Rest
Speed Light: a weight you could push for about 10 minutes with breaks 10 to 20 yards 4 to 6 30 to 60 seconds
Power Heavy: about 70% of body weight if you don’t know your max 10 to 25 yards 4 to 6 30 to 60 seconds
Endurance Light, as for speed About 1 minute 5 to 10 30 to 60 seconds

Beginners can use no added weight at all. Treat the heavy row with care: the NSCA coach notes that for a novice, even 30% of body weight may change how you move. If you can only shuffle the sled at a walk, it’s too heavy for speed work.

To make progress, add a little weight once your speed holds over the whole push, or keep the weight and add a push. Our guide to progressive overload explains the idea.

Two ways to measure a sled push

You can set a sled workout by distance or by time.

  • Weight and distance. For example, 4 pushes of 20 yards. This suits short, fast pushes on a marked track.
  • Weight and time. For example, 5 pushes of 1 minute each. This suits small spaces where you turn around often.

Pick one and stick with it for a few weeks so you can compare. Keep the floor the same too, since a new surface changes how heavy the sled feels.

No sled? Try these

You can train the same forward drive without a sled:

  • Plate push. Put a weight plate face down on turf and drive it forward with your hands on top. It feels the most like a sled.
  • Towel push. On a smooth floor, put both hands on a folded towel and push it across the room in a low lean.
  • Hill sprints. Sprint or march hard up a short, steep hill, then walk back down. The hill gives the resistance.
  • Wall drive. Lean into a wall with your arms straight and your body at a low angle, then drive one knee up at a time, fast. It teaches the body position without moving anything.

None of these copies a sled exactly, but each one gets your legs pushing hard. For more short, hard work with no equipment, see HIIT for beginners.

Staying safe

  • Warm up first. A few minutes of easy movement helps. See how to warm up.
  • Keep your back flat. If your back starts to round, take weight off.
  • Use a flat surface and grippy shoes. Slipping is an easy way to get hurt.
  • Stop if it hurts. Pain in your back or knees means stop and rest. If you’ve had trouble there before, check with your doctor or a physical therapist first.

Pair sled pushes with farmers carries at the end of a workout for a short, tough finisher.

Also asked

How much weight should I put on a sled push?

If you're new, start with the empty sled and add one plate at a time. A common starting plan uses a weight you could push for about 10 minutes with short breaks. For heavy power pushes, one guide suggests about 70% of body weight if you don't know your max, but a sprint coach writing for the NSCA warns that even 30% of body weight may change a beginner's form. The right load is the one you can keep moving with good form.

Why does the same sled weight feel heavier at a different gym?

The floor matters a lot. In one study of sled towing, the grippiest of four sports surfaces had nearly three times the friction of the slickest one. So a load that glides on one turf can grind on another. Judge the load by how it moves, and test it fresh in each new place.

How far should you push a sled?

For speed or power, push 10 to 25 yards, 4 to 6 times, with 30 to 60 seconds of rest. For endurance, push for about a minute at a time, 5 to 10 times. Sprint coaches also use 6 to 10 pushes of 15 yards with about 2 minutes of rest.

Is a sled push good for beginners?

Yes. There's no lowering phase, so it's easy to learn and simple to scale: take plates off and it gets easier. Start light with the high grip, and push on a flat surface in shoes with good grip.

What can I do instead of a sled push?

Push a weight plate across turf, or push a towel across a smooth floor with your hands on it. Hill sprints and a wall drive train the same forward lean and leg drive. None of these is exactly the same as a sled, but each one gets your legs pushing hard.

Sources

  1. Kovaluk (2022), Ice hockey strength and conditioning considerations, sled resisted sprint training as a dynamic correspondence exercise for improving on-ice acceleration (NSCA Coach 9.3)
  2. Cahill et al. (2021), Sled-Push Load-Velocity Profiling and Implications for Sprint Training Prescription in Young Athletes (Journal of Strength and Conditioning Research)
  3. Hoffmann (2014), An Investigation of the Sled Push Exercise, Quantification of Work, Kinematics, and Related Physical Characteristics (East Tennessee State University dissertation)
  4. Linthorne and Cooper (2013), Effect of the coefficient of friction of a running surface on sprint time in a sled-towing exercise (Sports Biomechanics)
  5. Healthline, How to use the sled push (medically reviewed by a dietitian who is also a strength coach)