AI-generated imageFree tools · Updated 2026-11-09
Barbell plate calculator
Enter the weight you want on the bar and pick your bar, and this shows which plates to load on each side. It works in pounds or kilograms, for a standard bar or a lighter one. For 225 lb on a 45 lb bar, that's two 45 lb plates per side.
45 + 45 lb on each side
Bar 45 lb, plus 90 lb on each side, makes 225 lb.
Common weights, plates per side
On a 45 lb bar, with 45, 35, 25, 10, 5 and 2.5 lb plates, heaviest first:
| Total | Each side |
|---|---|
| 95 lb | 25 |
| 135 lb | 45 |
| 185 lb | 45 + 25 |
| 225 lb | 45 + 45 |
| 275 lb | 45 + 45 + 25 |
| 315 lb | 45 + 45 + 45 |
| 365 lb | 45 + 45 + 45 + 25 |
| 405 lb | 45 + 45 + 45 + 45 |
| 495 lb | 45 + 45 + 45 + 45 + 45 |
On a 20 kg bar, with 25, 20, 15, 10, 5, 2.5 and 1.25 kg plates:
| Total | Each side |
|---|---|
| 40 kg | 10 |
| 60 kg | 20 |
| 80 kg | 25 + 5 |
| 100 kg | 25 + 15 |
| 120 kg | 25 + 25 |
| 140 kg | 25 + 25 + 10 |
| 160 kg | 25 + 25 + 20 |
| 180 kg | 25 + 25 + 25 + 5 |
| 220 kg | 25 + 25 + 25 + 25 |
How it works
Subtract the bar and any collars from your target. Then halve what's left. That is the weight for each side. The calculator then fills each side with the heaviest plate that fits, again and again, until nothing more fits. If a little is left over, it tells you the closest weight you can load.
It assumes you have as many of each plate as you need. Untick any size your gym doesn't have and it works around it.
In IPF competition, the bar weighs 20 kg and each collar 2.5 kg, so an empty bar with collars is 25 kg. Plates there run from 25 kg down to 1.25 kg, with smaller discs kept for record attempts.
Not sure what weight to load? The one-rep max calculator gives you working weights from a recent set, and the RPE calculator helps you pick by effort. For warm-up sets, see how to warm up before lifting.
Also asked
How much does a barbell weigh?
A standard men's Olympic bar weighs 20 kg, about 44 lb. In pounds, gyms usually call it a 45 lb bar. A women's Olympic bar weighs 15 kg, about 33 lb. Technique bars and fixed bars vary, so check the end of the bar or ask your gym.
How many plates do I need for 225?
Two 45 lb plates on each side of a 45 lb bar. That is 45 + 90 + 90 = 225 lb. For 315, add a third 45 to each side, and for 405, a fourth.
Do collars count toward the weight?
Spring clips weigh very little and are usually left out. Competition collars do count: in IPF meets, each one weighs 2.5 kg, so the bar and collars together weigh 25 kg. Enter your collar weight above if yours are heavy.
What if I can't load the exact weight?
The calculator shows the closest weight you can load at or below your target with the plates you ticked. Small plates such as 1.25 kg or 1.25 lb let you add weight in smaller steps.
Should the plates be the same on both sides?
Yes. Load the same plates in the same order on each side, heaviest closest to the middle of the bar. An uneven bar can tip, so use clips or collars to keep plates from sliding.